:	May 4, 2006

.

Disconnect the battery ground cable.

.

Recover the A/C refrigerant.

.

Remove the turbocharger intake tube.

.

: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.   : Care must be taken to avoid damage to the mating surfaces. Disconnect the A/C compressor low pressure line.   Remove the LH retaining bolt.   Remove and discard the O-ring seal.

.

: Immediately cap all refrigerant lines to prevent ingress of dirt and moisture.   : Care must be taken to avoid damage to the mating surfaces. Disconnect the A/C compressor high pressure pipe.   Remove the LH retaining bolt.   Remove and discard the O-ring seal.

.

Remove the A/C compressor.   Disconnect the A/C compressor electrical connector.   Remove the three retaining bolts.

.

: Lubricate the new seals with clean refrigerant oil. Install the A/C compressor.   Install the three retaining bolts.   Tighten the bolts to 23 Nm (17 lb.ft).   Connect the A/C compressor electrical connector.

.

Connect the A/C compressor high-pressure pipe.   Remove the blanking caps from the ports.   Install a new O-ring seal.   Tighten the retaining bolt to 9 Nm (7 lb.ft).

.

Connect the A/C compressor low pressure line.   Remove the blanking caps from the ports.   Install a new O-ring seal.   Tighten the retaining bolt to 9 Nm (7 lb.ft).

.

Install the turbocharger intake tube.

.

Recharge the A/C system.

.

Connect the battery ground cable.